常德迷你消防箱箱体生产线
浏览次数：90次
- 产品规格：
- 发货地:山东省潍坊潍城区
关键词
常德迷你消防箱箱体生产线
详细说明
消火栓箱自动生产线是炜桦一直下功夫开发的设备，一直着力于将设备自动化开发到世界的前列。目前消火栓箱自动生产线一次成型，出来就是一个冲好孔折好的框体，平均一小时可生产100个箱体。经过我公司不懈努力，现在的消火栓箱自动生产线也可以用作下料线，可以生产门板，背板和安装板，所有的切角和孔全部完成，下来用折弯机折下即可。这样一套设备即可用作下料线也可作为框体生产线，对于企业是个利好的消息。
消防箱壳体高度、宽度、深度都可在人机交互界面（触摸屏）随意调整。可以满足所有规格的消防箱生产。整个生产工艺无废料，而且一个人即可操作生产，
潍坊炜桦冷弯机械制造有限公司面向潍坊地区用户推荐消防箱全自动生产线,消防箱自动生产设备,消防箱箱体生产线,新型消防箱生产线。
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用台湾轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
Forming machine: The main frame of this production line is welded with 100*100*3MM square steel, the frame adopts integral fixed archway, the side plate adopts 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the discharging part adopts torsion up and down adjustment, the main machine has good steel and stable structure.
B:滚压模具（轧辘）：16组辊轮成型，均采用Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
C:传动部分：是生产线成形动力的输送部分，其动力由主电机到减速箱，再由减速箱通过齿轮传送到主动轮上，主动轮通过过度齿轮传动，使得上下轧辘同步转动。
C: Driving part: It is the conveying part of the forming power of the production line. Its power is transferred from the main motor to the reducer, and then from the reducer to the driving wheel through gears. The driving wheel is driven by excessive gears, so that the upper and lower rollers rotate synchronously.
3．定长折弯部分：由定长装置及折弯机构组成。定长装置是通过激光探头结合编码器定长，当板料走到定尺长度时，通过PLC控制折弯产品。
3. Fixed length bending part: It consists of fixed length device and bending mechanism. The fixed length device is fixed by laser probe combined with encoder. When the sheet reaches the fixed length, the bending product is controlled by PLC.
4．托料架：此装置在成型机的后面，根据产品长度的不同合理排布。
4. Bracket: The device is arranged reasonably in the back of the forming machine according to the length of the product.
5．电控系统：整条生产线采用集中控制，元件采用进口及国产上等产品，或由客户，标准件元件采用台湾。设备电控元件的安装符合国家规定，线号清晰。
5. Electronic control system: The whole production line adopts centralized control. The components are imported and domestic high-quality products, or designated by customers. The standard components are made of Taiwan brand. The installation of the electronic control components of the equipment conforms to the national regulations, and the line number is clear.
操作系统：触摸屏
Operating System: Touch Screen
控制方式：PLC
Control mode: PLC
传动模式：齿轮箱
Drive mode: gearbox
材料规格：Q235
Material Specification: Q235
生产速度：0-15m
Production speed: 0-15m
切断方式：液压切断
Cut-off mode: hydraulic cut-off
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
电气控制：PLC
Electrical control: PLC
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
钢带厚度：0-6mm
Strip thickness: 0-6mm
m.weifangweihua.b2b168.com
消防箱壳体高度、宽度、深度都可在人机交互界面（触摸屏）随意调整。可以满足所有规格的消防箱生产。整个生产工艺无废料，而且一个人即可操作生产，
潍坊炜桦冷弯机械制造有限公司面向潍坊地区用户推荐消防箱全自动生产线,消防箱自动生产设备,消防箱箱体生产线,新型消防箱生产线。
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用台湾轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
Forming machine: The main frame of this production line is welded with 100*100*3MM square steel, the frame adopts integral fixed archway, the side plate adopts 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the discharging part adopts torsion up and down adjustment, the main machine has good steel and stable structure.
B:滚压模具（轧辘）：16组辊轮成型，均采用Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
C:传动部分：是生产线成形动力的输送部分，其动力由主电机到减速箱，再由减速箱通过齿轮传送到主动轮上，主动轮通过过度齿轮传动，使得上下轧辘同步转动。
C: Driving part: It is the conveying part of the forming power of the production line. Its power is transferred from the main motor to the reducer, and then from the reducer to the driving wheel through gears. The driving wheel is driven by excessive gears, so that the upper and lower rollers rotate synchronously.
3．定长折弯部分：由定长装置及折弯机构组成。定长装置是通过激光探头结合编码器定长，当板料走到定尺长度时，通过PLC控制折弯产品。
3. Fixed length bending part: It consists of fixed length device and bending mechanism. The fixed length device is fixed by laser probe combined with encoder. When the sheet reaches the fixed length, the bending product is controlled by PLC.
4．托料架：此装置在成型机的后面，根据产品长度的不同合理排布。
4. Bracket: The device is arranged reasonably in the back of the forming machine according to the length of the product.
5．电控系统：整条生产线采用集中控制，元件采用进口及国产上等产品，或由客户，标准件元件采用台湾。设备电控元件的安装符合国家规定，线号清晰。
5. Electronic control system: The whole production line adopts centralized control. The components are imported and domestic high-quality products, or designated by customers. The standard components are made of Taiwan brand. The installation of the electronic control components of the equipment conforms to the national regulations, and the line number is clear.
操作系统：触摸屏
Operating System: Touch Screen
控制方式：PLC
Control mode: PLC
传动模式：齿轮箱
Drive mode: gearbox
材料规格：Q235
Material Specification: Q235
生产速度：0-15m
Production speed: 0-15m
切断方式：液压切断
Cut-off mode: hydraulic cut-off
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
电气控制：PLC
Electrical control: PLC
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
钢带厚度：0-6mm
Strip thickness: 0-6mm
m.weifangweihua.b2b168.com